The Zentinel
———————————————————————————————————
NOTE: If you’d like your Zentinel $h@rpened, please be sure to add the “Zentinel $h@rpening Add-on” during checkout. If you did not include the add-on in your order, your Zentinel will NOT be $h@rpened.
HEADS UP: This listing is a MINI PREORDER. Expecting to ship within 1 week. You can get updates by following me on Instagram (@jimpy.designs). I am always available for questions or concerns! (LIMIT OF 2 PER CUSTOMER. ORDERING MORE THAN 2 GRANTS ME PERMISSION TO CANCEL AND REFUND YOUR ORDER!)
———————————————————————————————————
It’s been 2 years since I’ve released a flagship balisong. I’m making my return to the balisong scene with the Zentinel. The Zentinel is a mostly familiar design with a few new features that I’m sure you’ll appreciate. With the overwhelming positive reception surrounding the Sentinel project, I wanted to improve on the already beloved design by implementing both your feedback and my personal desire to continue innovating within the balisong space. You guys wanted handle jimping, so I added handle jimping. You guys wanted better blade steel, so the Zentinel is rocking S35VN steel. You guys wanted serialized builds, so every Zentinel will feature laser engraved serialization/build info on the blade. As for me, I wanted to make the Zentinel extra special by making it the first balisong design to feature my “Pin Shield” pin system. I had the idea for this system before the Sentinels were originally released, and it is now finally being realized in one of my balisongs at scale. Just like the Sentinel, I set out to design a production balisong that features a blend of aesthetics, construction, and performance. I believe the Zentinel hits the mark.
With the Zentinels, I wanted to get the balance and weight distribution as close as I could to its predecessor. They don’t feel exactly the same, but the flipping experience is close enough according to those who have tried them both. Weighing in at about 4.6 oz, the Zentinel isn’t too heavy nor too light, just like its older brother. I wanted the low maintenance of the Sentinel to carry over into the Zentinel. Thanks to the channel handles and Pin Shield construction, there are only two screws on the Zentinel that you need to worry about. Because the Zentinel runs on hand tuned bushings and fitted phosphor bronze washers, these screws shouldn’t need much adjustment. And with the addition of some blue loctite on the screws, the factory tune should hold for even longer. The only consistent maintenance necessary is lubricating the pivots and a good cleaning after excessive use (as long as you don’t beat it too hard of course). It is also important to note that the handles feature a widened channel which helps combat blade rub from forming on your blade. Overall, the Zentinel is ideal for any balisong enthusiast, collector, flipper, or combination of the three that either enjoyed the first generation Sentinel or want to pick one up to try for the first time.
Each order includes:
(1) Zentinel
(1) Carrying Case
(1) Stress Ball
Stickers
Difference Between Grade A & Grade B:
Grade A Zentinel These are as close to perfect as possible from “factory”. Practically no cosmetic imperfections. These are listed at full price.
Grade B Zentinel These may show minor scratches/blemishes/inconsistencies on the blade, handles, or both. Overall, Grade B Zentinels still flip great, have a great tune, and have a very clean finish but are not able to be classified as near perfect like a Grade A Zentinel. The price reflects said deviations in quality.
Grade C Zentinel These may show noticeable scratches/blemishes/inconsistencies on the blade, handles, or both. Overall, Grade C Zentinels still flip great, have a great tune, and have a clean finish. The price reflects said deviations in quality.
Specifications:
Blade Material: S35VN Stainless Steel
Handle Material: 6AL-4V titanium
Weight: ~4.6oz
Handle Length: 5.5”
OAL (Tip to Base of Handle): ~10”
Pivot Style: Hand tuned bushings & fitted washers
Pin System: “Pin Shield” pin system
———————————————————————————————————
PLEASE NOTE:
Just like anything in life, nothing is truly perfect. This fact of life also applies to the Zentinel. Some may have minuscule blemishes or inconsistencies even after careful inspection and hand finishing. Keep in mind, the Zentinel was designed to be flipped, used, and enjoyed. Once you start flipping it, it’s going to get dinged, dropped, smacked, and battle worn anyway. You may find a tiny scratch or two. You may also find the machining is not truly 100% perfect. Even though we all strive for/expect literal perfection, once again, nothing is truly perfect.
DISCLAIMER:
By purchasing a Zentinel from this website, you (the buyer) agrees to the terms mentioned below:
You understand and will comply to all local, state, and federal laws of which relate to this product.
You assume all risks in owning and using the product. I am NOT responsible for your actions.
You agree that you are at least 18 years of age.
You have read, acknowledged, and agree to ALL of the content presented under the Terms of Service section of this website.
———————————————————————————————————
NOTE: If you’d like your Zentinel $h@rpened, please be sure to add the “Zentinel $h@rpening Add-on” during checkout. If you did not include the add-on in your order, your Zentinel will NOT be $h@rpened.
HEADS UP: This listing is a MINI PREORDER. Expecting to ship within 1 week. You can get updates by following me on Instagram (@jimpy.designs). I am always available for questions or concerns! (LIMIT OF 2 PER CUSTOMER. ORDERING MORE THAN 2 GRANTS ME PERMISSION TO CANCEL AND REFUND YOUR ORDER!)
———————————————————————————————————
It’s been 2 years since I’ve released a flagship balisong. I’m making my return to the balisong scene with the Zentinel. The Zentinel is a mostly familiar design with a few new features that I’m sure you’ll appreciate. With the overwhelming positive reception surrounding the Sentinel project, I wanted to improve on the already beloved design by implementing both your feedback and my personal desire to continue innovating within the balisong space. You guys wanted handle jimping, so I added handle jimping. You guys wanted better blade steel, so the Zentinel is rocking S35VN steel. You guys wanted serialized builds, so every Zentinel will feature laser engraved serialization/build info on the blade. As for me, I wanted to make the Zentinel extra special by making it the first balisong design to feature my “Pin Shield” pin system. I had the idea for this system before the Sentinels were originally released, and it is now finally being realized in one of my balisongs at scale. Just like the Sentinel, I set out to design a production balisong that features a blend of aesthetics, construction, and performance. I believe the Zentinel hits the mark.
With the Zentinels, I wanted to get the balance and weight distribution as close as I could to its predecessor. They don’t feel exactly the same, but the flipping experience is close enough according to those who have tried them both. Weighing in at about 4.6 oz, the Zentinel isn’t too heavy nor too light, just like its older brother. I wanted the low maintenance of the Sentinel to carry over into the Zentinel. Thanks to the channel handles and Pin Shield construction, there are only two screws on the Zentinel that you need to worry about. Because the Zentinel runs on hand tuned bushings and fitted phosphor bronze washers, these screws shouldn’t need much adjustment. And with the addition of some blue loctite on the screws, the factory tune should hold for even longer. The only consistent maintenance necessary is lubricating the pivots and a good cleaning after excessive use (as long as you don’t beat it too hard of course). It is also important to note that the handles feature a widened channel which helps combat blade rub from forming on your blade. Overall, the Zentinel is ideal for any balisong enthusiast, collector, flipper, or combination of the three that either enjoyed the first generation Sentinel or want to pick one up to try for the first time.
Each order includes:
(1) Zentinel
(1) Carrying Case
(1) Stress Ball
Stickers
Difference Between Grade A & Grade B:
Grade A Zentinel These are as close to perfect as possible from “factory”. Practically no cosmetic imperfections. These are listed at full price.
Grade B Zentinel These may show minor scratches/blemishes/inconsistencies on the blade, handles, or both. Overall, Grade B Zentinels still flip great, have a great tune, and have a very clean finish but are not able to be classified as near perfect like a Grade A Zentinel. The price reflects said deviations in quality.
Grade C Zentinel These may show noticeable scratches/blemishes/inconsistencies on the blade, handles, or both. Overall, Grade C Zentinels still flip great, have a great tune, and have a clean finish. The price reflects said deviations in quality.
Specifications:
Blade Material: S35VN Stainless Steel
Handle Material: 6AL-4V titanium
Weight: ~4.6oz
Handle Length: 5.5”
OAL (Tip to Base of Handle): ~10”
Pivot Style: Hand tuned bushings & fitted washers
Pin System: “Pin Shield” pin system
———————————————————————————————————
PLEASE NOTE:
Just like anything in life, nothing is truly perfect. This fact of life also applies to the Zentinel. Some may have minuscule blemishes or inconsistencies even after careful inspection and hand finishing. Keep in mind, the Zentinel was designed to be flipped, used, and enjoyed. Once you start flipping it, it’s going to get dinged, dropped, smacked, and battle worn anyway. You may find a tiny scratch or two. You may also find the machining is not truly 100% perfect. Even though we all strive for/expect literal perfection, once again, nothing is truly perfect.
DISCLAIMER:
By purchasing a Zentinel from this website, you (the buyer) agrees to the terms mentioned below:
You understand and will comply to all local, state, and federal laws of which relate to this product.
You assume all risks in owning and using the product. I am NOT responsible for your actions.
You agree that you are at least 18 years of age.
You have read, acknowledged, and agree to ALL of the content presented under the Terms of Service section of this website.
———————————————————————————————————
NOTE: If you’d like your Zentinel $h@rpened, please be sure to add the “Zentinel $h@rpening Add-on” during checkout. If you did not include the add-on in your order, your Zentinel will NOT be $h@rpened.
HEADS UP: This listing is a MINI PREORDER. Expecting to ship within 1 week. You can get updates by following me on Instagram (@jimpy.designs). I am always available for questions or concerns! (LIMIT OF 2 PER CUSTOMER. ORDERING MORE THAN 2 GRANTS ME PERMISSION TO CANCEL AND REFUND YOUR ORDER!)
———————————————————————————————————
It’s been 2 years since I’ve released a flagship balisong. I’m making my return to the balisong scene with the Zentinel. The Zentinel is a mostly familiar design with a few new features that I’m sure you’ll appreciate. With the overwhelming positive reception surrounding the Sentinel project, I wanted to improve on the already beloved design by implementing both your feedback and my personal desire to continue innovating within the balisong space. You guys wanted handle jimping, so I added handle jimping. You guys wanted better blade steel, so the Zentinel is rocking S35VN steel. You guys wanted serialized builds, so every Zentinel will feature laser engraved serialization/build info on the blade. As for me, I wanted to make the Zentinel extra special by making it the first balisong design to feature my “Pin Shield” pin system. I had the idea for this system before the Sentinels were originally released, and it is now finally being realized in one of my balisongs at scale. Just like the Sentinel, I set out to design a production balisong that features a blend of aesthetics, construction, and performance. I believe the Zentinel hits the mark.
With the Zentinels, I wanted to get the balance and weight distribution as close as I could to its predecessor. They don’t feel exactly the same, but the flipping experience is close enough according to those who have tried them both. Weighing in at about 4.6 oz, the Zentinel isn’t too heavy nor too light, just like its older brother. I wanted the low maintenance of the Sentinel to carry over into the Zentinel. Thanks to the channel handles and Pin Shield construction, there are only two screws on the Zentinel that you need to worry about. Because the Zentinel runs on hand tuned bushings and fitted phosphor bronze washers, these screws shouldn’t need much adjustment. And with the addition of some blue loctite on the screws, the factory tune should hold for even longer. The only consistent maintenance necessary is lubricating the pivots and a good cleaning after excessive use (as long as you don’t beat it too hard of course). It is also important to note that the handles feature a widened channel which helps combat blade rub from forming on your blade. Overall, the Zentinel is ideal for any balisong enthusiast, collector, flipper, or combination of the three that either enjoyed the first generation Sentinel or want to pick one up to try for the first time.
Each order includes:
(1) Zentinel
(1) Carrying Case
(1) Stress Ball
Stickers
Difference Between Grade A & Grade B:
Grade A Zentinel These are as close to perfect as possible from “factory”. Practically no cosmetic imperfections. These are listed at full price.
Grade B Zentinel These may show minor scratches/blemishes/inconsistencies on the blade, handles, or both. Overall, Grade B Zentinels still flip great, have a great tune, and have a very clean finish but are not able to be classified as near perfect like a Grade A Zentinel. The price reflects said deviations in quality.
Grade C Zentinel These may show noticeable scratches/blemishes/inconsistencies on the blade, handles, or both. Overall, Grade C Zentinels still flip great, have a great tune, and have a clean finish. The price reflects said deviations in quality.
Specifications:
Blade Material: S35VN Stainless Steel
Handle Material: 6AL-4V titanium
Weight: ~4.6oz
Handle Length: 5.5”
OAL (Tip to Base of Handle): ~10”
Pivot Style: Hand tuned bushings & fitted washers
Pin System: “Pin Shield” pin system
———————————————————————————————————
PLEASE NOTE:
Just like anything in life, nothing is truly perfect. This fact of life also applies to the Zentinel. Some may have minuscule blemishes or inconsistencies even after careful inspection and hand finishing. Keep in mind, the Zentinel was designed to be flipped, used, and enjoyed. Once you start flipping it, it’s going to get dinged, dropped, smacked, and battle worn anyway. You may find a tiny scratch or two. You may also find the machining is not truly 100% perfect. Even though we all strive for/expect literal perfection, once again, nothing is truly perfect.
DISCLAIMER:
By purchasing a Zentinel from this website, you (the buyer) agrees to the terms mentioned below:
You understand and will comply to all local, state, and federal laws of which relate to this product.
You assume all risks in owning and using the product. I am NOT responsible for your actions.
You agree that you are at least 18 years of age.
You have read, acknowledged, and agree to ALL of the content presented under the Terms of Service section of this website.
